Call back
Choose language
en

Instructions

Please select an area of application

Necessary tools:

  • />
    Screwdriver
  • Roller
  • Knife
  • Degreaser
  • Scissors
  • Dryer

  1. Preparation to installation

    Remove from passenger compartment front and baсk seats.
    Clean and degrease the surface.

  2. Installation

    First layer – Vibro-deadening

    Use STP Aero 2,3 mm as a first layer. It’s a vibration-damping mastic material. To install the first layer, you have to measure the size. You can use a ruler or a tape line. All the parts of the material must be rolled down.

    Second layer – Sound absorption

    The second layer is STP AeroFlex 6 mm. It’s waterproof foam rubber with an adhesive base. This sound-absorbing material also serves as a heat-insulator.

    Third layer – Sound insulation

    The third layer is the sound insulator STP NoiseBlock 2 mm. It mustn’t be applied to the internal material directly, it can be used only as the third layer. STP NoiseBlock can be applied only on horizontal surfaces.

Print
Profile
Orders
The item is added to cart
Total cost €15.00

Choose Your Location

Visit our Global official site, or access the Standartplast official site of your Location.